Hdmi ® Cec Control Input Source Selection; Adjusting The Amplifier's Audio - Toshiba 42L6200U User Manual

100
Basic features
Using HDMI
NOTE
®
HDMI CEC Control input source selection
If an HDMI
(e.g. an amplifier) is connected to the HDMI
another HDMI
device.
Use the INPUT button on the remote control or the control panel,
see "Learning about the remote control" on page

Adjusting the amplifier's audio

Using the TV's remote control, you can adjust or mute the sound
volume of your amplifier.
❖
The VOL (+ -) buttons adjust the volume level.
❖
The MUTE button turns off the sound.
1 Press the MENU button. Select SETTINGS,
PREFERENCES, HDMI
press the OK button.
2 Press the ( /
Preference.
3 Press the ( /
NOTE
NOTE
®
CEC Control
These functions depend on the connected devices.
®
The HDMI CEC Player Control item is not available under the
following conditions:
❖
®
A non-HDMI
❖
The Enable HDMI
❖
The connected HDMI
recording device
®
CEC device with HDMI
®
CEC device that is connected to the master HDMI
arrow) buttons to highlight Speaker
arrow) buttons to select Amplifier.
Confirm that a connected HDMI
etc.) is selected for the Amplifier input source.
❖
You can also use this function when the amplifier is connected to
the TV's DIGITAL AUDIO OUT terminal (not HDMI
Select a digital audio input mode on the amplifier.
❖
These functions depend on the device connected.
input is selected
®
CEC Control item is set to Off
®
CEC device is not a playback or
®
switching capability
®
CEC Control Setup, and then
®
CEC device (such as DVD player,
®
input, you can select
49.
®
connection).
®