Adjusting The Picture Quality - Toshiba 58L9300U User Manual

Picture and Sound Controls 1 1 3
Adjusting the pictur
Adjusting the picture quality
The adjustments you make to picture quality under a picture mode are
saved to that picture mode.
Selection Press (_I) Press (1_)
Backlight* Darker Lighter
Contrast Lower Higher
Brightness Darker Lighter
Color Paler Deeper
Tint Reddish Greenish
Sharpness Softer Sharper
*Backlight: Adjusts the brightness of the entire screen. When in video mode and
no signal is input, this selection is set to 0. (Settings are stored in memory.)
NOTN Somesettings cannotbeadjusted whenthepicturemodeis setto
AutoView.
To adjust the picture quality:
1 Press the SETUP button.
2 Select Picture and press the OK button.
3 Press the A/V (arrow) buttons to select the setting you would
like to adjust (Backlight, Contrast, Brightness, Color, Tint, or
Sharpness).
4 Press the I* (arrow) button.
5 Press the "ql/l*(arrow) buttons to adjust the setting.
6 Press the EXIT button.
NO'rN o:o Anypicturesettings thatyouadjustaffect t hecurrentinputonly.
Youcanadjustthepicturequalityseparately f or eachinput.
•:. Depending o n a Sharpness v alue,theResolution+ effect m aybe
reduced.
To reset to the factory defaults:
1 Press the SETUP button.
2 Select Picture > Reset.
3 Press the OK button.
A confirmation screen appears.
4 Press the "_/1_ (arrow) buttons to select Yes, and then press OK.