Table of Contents
Advertisement
Picture and Sound Controls
1 1 7
Using the advanced picture
settings feature
BaseColorAdjustment
When ColorMaster
TM
is set to On, the list of base colors appears.
You can select a base color to adjust.
1
Press the SETUP
button.
2
Select Picture
> Advanced
Picture
Settings
> Base Color
Adjustment.
3
Press the OKbutton.
The Base Color Adjustment
screen appears.
4
Press the A/•
(arrow) buttons
to select a color. Press the I_ (arrow)
button.
5
Press the ,_/I_ (arrow)
buttons to select Hue, Saturation,
or
Brightness.
6
Press the A/•
(arrow)
buttons to adjust the setting.
7
Repeat Steps 4 through 6 to adjust other colors. To reset the
adjustments
to the factory defaults,
select Reset on the screen,
and
then press the OK button. (A confirmation
screen appears.
Press the
4/I_
(arrow)
buttons to select Yes, and then press the OK button.)
Colortemperature
I
Press the SETUP
button.
2
Select Picture
> Advanced
Picture
Settings
> Color
Temperature
and press the OK button.
3
Select Color Temperature
and press the OK button.
Press the A/
•
(arrow)
buttons
to select Cool, Medium,
or Warm.
4
Press the OKbutton.
5
Select Color Temperature
and press the OK button.
Press the A/
•
(arrow)
buttons
to select the Red Level, Green
Level, or Blue
Level.
6
Press the I_ (arrow) button.
7
Press the "_/l_ (arrow)
buttons to adjust the level. The adjustment
range is -l0 (less of selected
color) to +10 (more of selected
color).
8
Press the EXIT
button.
NOTE
This feature is not available in Standardand Movie mode.
Advertisement
Table of Contents
