Skipping Channels - Toshiba 58L9300U User Manual

0 Settingup yourTV
Skipping channels"
ManualTuning
After storing channels in memory, you can manually enter channels if the
channel number is known.
1 Press the SETUP button.
2 Select Installation > Channel Tuning > Manual Tuning, and then
press the OK button.
3 Use buttons 0-9 on the remote control to enter the channel number
(for example, 56).
4 Press the OK button.
5 Press the OK button again to begin Manual Tuning.
The channels found are listed at the bottom of the screen.
Option: Description:
ATV Analog channel
DTV Digitalchannel
Skipping channels
To prevent a channel from being viewed, you can set it to be skipped.
1 Press the SETUP button.
2 Select Options > Channel Options and then press the OK button.
The list of channels appears.
Ch Type Lauel _
2o_ _ :,-2 [] []
_o,-2o, _ [] []
,o_-2o-_ [] []
2o, _ [] []
,o,-2o, _ [] []
(Sample hnage) (71annel options
3 Press the "I/1_ (arrow) buttons to select the Skip colulnn
(-'_)
and
press the A/V (arrow) buttons to select a channel to skip.
4 Press the OK button.
The box is selected.
5 To clear the selection, press the OK button.