How Do I Adjust The Sound; Turning The Speakers On - Kenwood Sovereign VR-5080 User Manual

How Do I Adjust the Sound?

How Do I Adjust the Sound?
You can control and adjust a variety of sound settings using the receiver's
front panel or Remote Control unit.

Turning the Speakers On

To turn on the front A speakers, open the receiver's front panel door and
press the SPEAKERS A button.
Push the lower part of
the door.
To turn on the front B speakers, press the SPEAKERS B button located in
the door of the receiver's front panel.
The lighting of a Å or ı indicator lamp indicates that the corresponding
set of speakers is on.
If you select SPEAKERS B while listening to a surround mode, the sound
will automatically revert to stereo. While SPEAKERS B is on, the sur-
round made cannot be selected.
If you use speakers connected to amplifiers via the PRE OUT jacks, choose
SPEAKERS A.
Speaker indicators (Å, ı)
I NPUT CD 2/TAPE 2
L SPEAKERS R
MODE MONITOR
LISTEN fi MULTI % fi %
P.CALL MEMORY AUTO BAND
MODE SET UP SOUND CONTROL
9