How Do I Adjust The Sound; Turning The Speakers On; Adjusting The Volume - Kenwood KRF-X9992D Connection And Setup Manual

How Do I Adjust the Sound?

How Do I Adjust the Sound?
You can control and adjust a variety of sound settings using the
receiver's front panel or PowerTouch.

Turning the Speakers On

To turn the Front A speakers on, press SPEAKER A on the
receiver's front panel. The red light indicates that the speakers
are on.
To turn the Front B speakers on, press SPEAKER B on the
receiver's front panel. The red light indicates that the speakers
are on.
If you select SPEAKER B while listening to a surround mode, the
sound will automatically revert to stereo. If you manually select
a surround mode while SPEAKER B is on, SPEAKER B will
automatically shut off.
If you use speakers connected to amplifiers via the PRE OUT
jacks, choose Front A speakers.

Adjusting the Volume

Use one of the following methods to adjust the volume.
• Turn the volume knob on the front panel of the receiver.
UP
• Press in the appropriate direction on PowerTouch.
DOWN
10 Audio-Video Receiver KRF-X9992D