Kenwood Sovereign VR-5080 User Manual page 40

How Do I Adjust the Surround Modes?
To customize the DSP effect:
1. Press the SOUND button and press the Next button repeatedly until
"DSP Wall Type" is displayed on Remote Control unit.
2. Press the LCD cursor up/down (
unit to select Soft, Medium or Hard.
3. Press Remote Control unit's Next button to display DSP Room Size.
4. Press the LCD cursor up/down (
unit to select Small, Medium or Large.
5. Press Remote Control unit's Next button.
6. Press the LCD cursor up/down (
unit to select one of Level 1 to Level 9, then press the Home button.
Operation on the receiver:
1. Press the SOUND button repeatedly until to display WALL type.
2. Press the MULTI CONTROL (%/fi) button to select SOFT, MEDIUM
or HARD.
3. Press the SOUND button to display ROOM size.
4. Press the MULTI CONTROL (%/fi) button to select SMALL, MEDIUM
or LARGE.
5. Press the SOUND button to display EFFECT LEVEL.
6. Press the MULTI CONTROL (%/fi) button to select one of LEVEL 1
to LEVEL 9, then press the SOUND button repeatedly until "SOUND
FIXED" is displayed.
32
/ ) button on Remote Control
/ ) button on Remote Control
/ ) button on Remote Control