Preparation For Recording; Adjust The Recording Level; Start Recording - Kenwood KRX-792 Instruction Manual

Recording on cassette deck (Deck B only)
ONE WAY _ Tape transport
If the Kenwood Surround Processor SS-992 or SS-592 is MODE key —_ direction indicators
connected to this unit, be sure to perform the following
operations when recording.
@ Set the surround mode to BYPASS mode.
e Set the SS-992's volume control to the center (15) position and do
not move it from that position.
@ Set the SS-592's MASTER LEVEL control to-10dB and do not move
it from that position.
CRLS key'|
7 " DOLBY NR key
@ Preparation for recording Deck B Operation keys
1 Set up the cassette deck. 3 Adjust the recording level.
Take up the tape completely
to a reel and insert it after
exposing the recordable por-
(@ Insert a tape in deck B. _ tionbyfeedingthe leader tape
portion.
(@) Play the musical source and output its sound.
@ Since this unit is not designed for use
with metal tapes, recording on meial
tapes cannot be carried out.
@ Press the CRLS key.
@) Set the tape transport
direction.
e Refer to page 18.
<J TAPE B BS
@) Select one-side or two-side recording.
ONE WAY
CRLS CRLS
= > 1X
MODE
(lights up) ' the indicator lights steadily.
OFF ---- : . - af @ The deck enters the record-pause mode.
teats reuseiaia repre @ |f you press the Record key while the indicator is blinking, the
(goes off) : recorded sound may distort. ,
e@ When the key is pressed while the indicator is blinking,
the level adjustment is terminated at that moment and the
deck enters the record-pause mode.
@ The recording jevel setting is suspended if the sound of source
is not input within about 5 second after the key has been
pressed.
@) Select the Dolby NR mode.
DOLBY NR
on {x
(lights up)
(goes off)
2 Select the source to be recorded.
Start recording.
Go to "Actual recording" according to the source to
be recorded.
VIDEO / AUX TAPE A TUNER
(3) (es) (Ei es) fete}
These cannot be
selected as the
recording source.
TAPE B PHONO co
KRX-792 (En) 21