Cabin Selection; Speaker Setting - Kenwood KDV-415U Instruction Manual

Audio Adjustments

Cabin Selection

You can compensate the delay of the sound arrival
time by selecting your environment from the
following car types;
Car type Display
Not compensating. "OFF"
Compact car "COMPACT"
Full size car "FULLSIZE"
Station wagon "WAGON"
1
Enter Cabin select mode
1 sec., and select "DSP"
Press [ ]
"CABIN".
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 10).
2
Select the car type
Turn the [AUD] knob and push the center when
the desired item is displayed.
3
Exit Cabin select mode
Press the [ ] button.
⁄
• You can compensate the distances in more details by
using <DTA setting> (page 29) function.
28
|
KDV-415U/ KDV-MP5042U
Car type Display
Minivan "MINIVAN"
Sport-utility vehicle "SUV"
Minivan long "MV LONG"
> >
"SETUP"

Speaker Setting

Setting the speaker to be connected, speaker size,
and installation position;
Setting item Range
Front Speaker Location "DOOR"/ "ON DASH"/ "UND DASH" (Under
>
"FRONT" "LOCATION" dash)
Front Speaker Size O.E.M/ 4 inch/ 5 inch/ 6½ inch/ 6¾ inch/
>
"FRONT" "SIZE" 7 inch/ 4×6/ 5×7/ 6×8/ 6×9/ 7×10
Front Tweeter "NONE"/ "USE"
>
"FRONT" "TWEETER"
Rear Speaker Location • "DOOR"/ "R-DECK"
>
"REAR" "LOCATION" • "2ND ROW"/ "3RD ROW" (Minivan/
Minivan long)
Front Speaker Size None/ O.E.M/ 4 inch/ 5 inch/ 6½ inch/
>
"REAR" "SIZE" 6¾ inch/ 7 inch/ 4×6/ 5×7/ 6×8/
6×9/ 7×10
Subwoofer Size None/ 6½ inch/ 8 inch/ 10 inch/ 12 inch/
>
"SUB-W" "SIZE" 15 inch over
1
Enter Speaker Setting mode
1 sec., and select "DSP"
Press [ ]
"SPEAKER".
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 10).
2
Select the speaker you want to set
Turn the [AUD] knob and push the center.
"FRONT"/ "REAR"/ "SUB-W"
3
Select the item you want to set
Turn the [AUD] knob and push the center.
4
Set the value
Turn the [AUD] knob and push the center when
the desired item is displayed.
5
Exit Speaker Setting mode
Press the [ ] button twice.
> >
"SETUP"