Kenwood KDV-415U Instruction Manual page 12

Function Control/ Setup Menu
Item Setting
"SETUP" "CABIN"
"SPEAKER"
"DTA"
"X'OVER"
"PRESET" "RECALL"
"MEMORY"
"DSP SET" "BYPASS"/
"THROUGH"*
Setup menu of remote control
By using the Setup menu, you can make various adjustments to items such as picture and sound. You can
also set a language for the subtitles and the Setup menu, among other things.
1
Select DVD or USB source
Press the [SRC] button.
Select the "DVD" or "USB" display.
2
Press the [7] button.
3
Enter Setup menu mode
Press the [SETUP] button.
12
|
KDV-415U/ KDV-MP5042U
Entry Setting overview
[AUD] Selects the car type to compensate the distance difference
between each speaker.
[AUD] Sets the connected speaker, speaker size, and installation position.
[AUD] Makes fine adjustment of the compensation value specified at
Cabin.
[AUD] Makes fine adjustment of the X'Over value specified at Speaker.
[AUD] Registering the value setup by Sound Control. Recalling the sound
setup registered by <Audio Preset Memory>.
[AUD] Registering the value setup by Sound Control.
Setting "BYPASS" passes the DSP function.
AUD
Setting "THROUGH" activates the DSP function.
4
Press the [2]/[3] button to select the menu.
LANGUAGE/ PICTURE/ AUDIO/ OTHER
5
Press the [5]/[∞] button to select the desired
item, and then press the [ENTER] button.
✍
To cancel pop-up menu, press the [RETURN]
button.
6
Press the [5]/[∞] button to select the desired
setting, and then press the [ENTER] button to
confirm your selection.
7
Exit Setup menu mode
Press the [SETUP] button.
The Setup menu ends.
⁄
• The memory cannot be erased by the Reset button.
Condition Page
28
28
29
29
30
30
—