Changing The Input Mode - Kenwood DVR-505 Instruction Manual

52
Speaker setting
Level setting using a music source
A music source can be used for speaker level setting and subwoofer level setting.
1 Play a disc marked "Dolby Digital".
2 Select the speaker.
3 Press the TRIM (5/∞) key to setting
the speaker level.

Changing the INPUT MODE

The input mode can be switched with SAT and AV AUX.
For listening to SAT input with high sound quality, con-
nect the digital output of your satellite tuner with co-
axial or optical cable and change the input mode as fol-
lows.
1 Select the SAT or AV AUX key.
SAT
2 Press the INPUT MODE key.
SELECT
F C R SW
TRIM
or
AV AUX
INPUT MODE
RANDOM
Changing the INPUT MODE
Speaker level adjustment can be performed by
pressing the keys F, C, R, and SW.
F: Front speakers
Switching is done as follows each time the switch
is pressed.
1 L ch : Left speaker
2 R ch : Right speaker
C: Center speaker
R: Rear (Surround) speakers
Switching is done as follows each time the switch
is pressed.
1 LS ch : Left surround speaker
2 RS ch : Right surround speaker
SW: Subwoofer
The speaker level can be changed in the range from -10
dB to +10 dB.
When the video is displayed, but no sound is put
out, the source may not contain digital audio. In such
Note Note
a case, please switch to ANALOG.
Each press switches the mode.
SAT input
1 ANALOG
2 COAXIAL
3 OPTICAL
DVR-505/DVR-7000 (EN)
AV AUX input
1 ANALOG
2 OPTICAL