Connecting To A Tv; Connecting To A Satellite Tuner; Dvr-505/Dvr-7000 (En - Kenwood DVR-505 Instruction Manual

14

Connecting to a TV

TV
COMPONENT Video cord (except for U.K)
*
COMPOSITE Video cord (accessory)
S-Video cord
COMPONENT connection corresponds only to some areas.
When the TV has a COMPONENT terminal, the DVD image will be played
Note Note
back with higher picture quality in case of COMPONENT connection.
Connect the S-video or the COMPOSITE video cable also in this case.

Connecting to a Satellite Tuner

Connect the OPTICAL or the COAXIAL cable, depending on the digital output of the satellite tuner.
Depending on the input switching, the output from the MONITOR OUT terminal will be one of
the following signals. Please note that a different signal type will not be put out.
S-VIDEO terminal : S-video signal connected to the (S-VIDEO) VCR IN, the (S-VIDEO) SAT IN, or
the AV AUX S terminal.
VIDEO terminal : Composite video signal connected to the (VIDEO) VCR IN, the (VIDEO) SAT
IN, or the AV AUX VIDEO terminal.
Remove protective cap
before connecting.
Audio cord
*
For U.K. only
If your TV set has a SCART terminal,
connect the accessory SCART plug to the
SCART terminal of the TV and connect
the COMPOSITE video cord.
Satellite tuner
OPTICAL or COAXIAL cable
S-video cord
COMPOSITE
video cord
System Connections

DVR-505/DVR-7000 (EN)