System Connections; Loudspeakers; Dvr-505/Dvr-7000 (En - Kenwood DVR-505 Instruction Manual

System Connections

12
Make connections as shown below.
When connecting the related system components, refer also
to the instruction manuals of the related components.
Caution
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or
fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of unit.
÷ Leave a space around the unit (from the largest outside dimension including pro-
jection) equal or greater than, shown below.
Top panel : 50 cm

Loudspeakers

Speaker terminal
1 2
The figure shows an example for the speakers for DVR-505.
Upper side mark
Side panel : 10 cm Back panel : 10 cm
Excessive insertion of the cable can
Note Note
cause defective contact.
Front
speaker
Center speaker
R
Surround
speaker
R
Subwoofer
Caution : Read this page carefully to ensure
Caution:
Do not plug in the power lead until all connec-
tions are completed.
Malfunction of microcomputer
If operation is not possible or erroneous
display appears even though all connec-
tions have been made properly, reset the
microcomputer referring to "In case of
difficulty".
Color tube
Black tube
Connect the speaker cable terminals
to the terminals with the same color
at the speaker terminal panel on the
main unit. Connect matching the
color of the speaker terminal (+ side)
and the color of the speaker cable
tube.
Speakers for DVR-7000
safe operation.

DVR-505/DVR-7000 (EN)

White
tube
+
–
Front
speaker
L
Speaker Color of the speaker terminal
panel on the main unit
Front right
Red
Center Green
Front left Blue
Surround right Orange
Subwoofer Brown
Surround left Gray
Surround
speaker
L
„