Changing The Tone - Kenwood DVR-605 Instruction Manual

Changing the Tone

This unit is equipped with various preset equalizers, so that various sounds can be enjoyed. In addition, it has an ACTIVE EQ.
function for one-touch equalization.
Selecting the DSP mode
Five different sounds are preset in DSP mode. Please select the type you like.
DSP mode can be selected only at the time of a PCM source (normal music CD, MP3 file, etc.).
REMOTE
Press the Listen mode key repeatedly
ACTIVE EQ.
Press the ACTIVE EQ key repeatedly
REMOTE
MAIN UNIT
ACTIVE EQ
Active EQ./
SOUND
Selecting the NIGHT (MID NIGHT) mode. (Dolby Digital only)
Any time you don't want to experience the loud and soft volume extremes of recorded sound (for example, late at night), use
NIGHT function to reduce volume extremes.
REMOTE
1
Press the SOUND key.
2
Press the TRIM ( 5 / ∞ ) key.
Listen mode
5
TRIM
∞
Active EQ./
SOUND
5
TRIM
∞
Each press switches the mode
(At the time of music CD)
1 DOLBY PL II MOVIE
2 DOLBY PL II MUSIC
3 DOLBY PRO LOGIC
4 CS II MUSIC
5 CS II CINEMA
CS II modes
6 CS II MONO
7 ARENA
8 JAZZ CLUB
DSP modes
9 THEATER
0 STADIUM
- DISCO
= STEREO
Each press switches the ACTIVE EQ.
1 CINEMA (ACTIVE EQ. lit)
2 MUSIC (ACTIVE EQ. lit)
3 OFF
÷ In some cases, the unit may not enter the ACTIVE EQ mode
by pressing the ACTIVE EQ key once. In this case, press the
key one more time.
Displayed NIGHT OFF (or NIGHT ON).
Each press switches the mode
1 NIGHT ON
2 NIGHT OFF
Let's put out some sound
DVR-605/DVR-6100/DVR-6100K (EN)
PRO LOGIC II
PRO LOGIC II
modes
CS II
Lit
DSP
Lit
Lit
Lit
19