System Connections; Loudspeakers; Dvr-605/Dvr-6100/Dvr-6100K (En; Carefully To Ensure Safe Operation - Kenwood DVR-605 Instruction Manual

System Connections

12
Make connections as shown below.
When connecting the related system components, refer also
to the instruction manuals of the related components.
Caution
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or
fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of unit.
÷ Leave a space around the unit (from the largest outside dimension including pro-
jection) equal or greater than, shown below.
Top panel : 50 cm

Loudspeakers

Speaker terminal
1 2
The figure shows an example for the speakers for DVR-605.
Upper side mark
The power in this equipment will not be completely cut
off from the AC wall outlet when the main switch is
turned OFF.
Side panel : 10 cm Back panel : 10 cm
Excessive insertion of the cable can
Note Note
cause defective contact.
Front
speaker
Center speaker
R
Surround
speaker
R
Subwoofer
Caution : Read this page carefully to ensure
safe operation.
Caution:
Do not plug in the power lead until all connec-
tions are completed.
Malfunction of microcomputer
If operation is not possible or erroneous
display appears even though all connec-
tions have been made properly, reset the
microcomputer referring to "In case of
difficulty".
Color tube
Black tube
Front
speaker
L
Connect the speaker cable terminals
to the terminals with the same color
at the speaker terminal panel on the
main unit. Connect matching the
color of the speaker terminal (+ side)
and the color of the speaker cable
tube.
Speaker
Front right
Center
Front left
Surround right
Subwoofer
Surround left
Surround
speaker
L
Speakers for DVR-6100/6100K

DVR-605/DVR-6100/DVR-6100K (EN)

ˇ
White
tube
– +
Color of the speaker terminal
panel on the main unit
Red
Green
White
Gray
Purple
Blue