Download Print this page

Kenwood DDX7019 Instruction Manual: Crossover Network Setup; Dvd Setup

Monitor with dvd receiver.
Hide thumbs

Advertisement

Crossover Network Setup

You can set a crossover frequency of speakers.
1
Select the speaker to set the crossover
1
1
2
2
3
1 Sets the High Pass Filter of the front speaker.
2 Sets the High Pass Filter of the rear speaker.
3 Sets the Low Pass Filter of the sub woofer.
4 Switches to the crossover setup screen.
5 Returns to the original screen.
2
Display the Crossover setup screen
3
Set the crossover
6
7
6 Sets the cross over frequency.
7 Sets the subwoofer phase. (Only when
"Subwoofer" is set to "On" in Audio Setup
and "LPF SUB FREQ" is set to other than
"Through")
8 Returns to the original screen.
DVD Setup
You can set up the DVD play.
1
2
4
5
8
• *1 Disabled when a DVD is being played.
Display the DVD SETUP screen
Touch [DVD SETUP] in the SETUP Menu (page
64).
Setup each item
1
2
3
4
1 Selects a disc menu language.*
(See <Language Setup>, page 66)
2 Selects a subtitle language.*
(See <Language Setup>, page 66)
3 Selects an audio language.*
(See <Language Setup>, page 66)
4 Sets the dynamic range.*
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen
to the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
5 Returns to the original screen.
5
1
1
1
1
(
Wide)
Next page 3
English
65

Advertisement

   Also See for Kenwood DDX7019

   Related Manuals for Kenwood DDX7019

This manual also for:

Ddx7039

Comments to this Manuals

Symbols: 0
Latest comments: