Table of Contents
Advertisement
Digitally Correcting for Overexposure and Underexposure
(HDR)
With HDR (High Dynamic Range), the camera shoots a series of CS images using
different exposure settings and combines them into a final image to correct for
overexposure or underexposure of subjects of different brightness levels.
1.
In the BEST SHOT Mode, select "HDR" (page 74).
2.
Press [SET] and then use [8] and [2] to select the
Control Panel option.
3.
Use [4] and [6] to select the HDR Level setting you want, and then
press [SET].
• The HDR Level can be set to Level 1, Level 2, or Level 3.
4.
Press the shutter button to shoot.
NOTE
• HDR works best when shooting with the camera mounted on a tripod.
• Shooting with this function causes the flash setting to change automatically to
? (Flash Off).
• Anti Shake correction performed to compensate for camera movement while
shooting with this function results in an image area that is narrower than normal.
• The desired HDR effect may not be attained if the camera or subject moves during
shooting.
Shooting with High Speed Anti Shake
(HS Anti Shake)
In addition to optical Anti Shake, a single press of the shutter button while HS Anti
Shake is enabled causes the camera to record multiple images and automatically
combine them. Use this feature to minimize image blur due to camera movement
under conditions where optical anti shake is not possible for some reason.
1.
In the BEST SHOT Mode, select "HS Anti Shake" (page 74).
2.
When you are ready to shoot, press the shutter button.
NOTE
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
• HS Anti Shake may not operate properly resulting in blurred images if the camera
is moved more than the allowable range or if the subject moves during shooting.
• When shooting with these BEST SHOT scenes, the "ISO" (page 44) and "ISO High
Limit" (page 99) are fixed at "Auto".
78
(HDR Level)
Using BEST SHOT
Advertisement
Table of Contents
