Your Macintosh - Casio Exilim EX-ZR500 User Manual

. To connect the camera to your computer and save files
1.
Turn on the camera and press [MENU].
2.
On the "¥ SETTING" tab, select "USB" and then press [6].
3.
Use [8] and [2] to select "Mass Storage", and then press [SET].
4.
Turn off the camera and then
use the USB cable that comes
with the camera to connect it to

your Macintosh.

• For details about connecting to
the camera and precautions
when connecting, see page 18.
5.
Press [ON/OFF] (Power) to turn on the camera.
When you turn on the camera, check to make sure that the color of its back lamp
changes from red to green or orange (page 19). In this mode, your Macintosh
recognizes the memory card loaded in the camera (or the camera's built-in
memory if it does not have a memory card loaded) as a drive. The appearance of
the drive icon depends on the Mac OS version you are using.
• The first time you connect the camera to your Macintosh with the USB cable,
an error message may appear on your computer. If this happens, disconnect
and then reconnect the USB cable.
6.
Double-click the camera's drive icon.
7.
Drag the "DCIM" folder to the folder to which you want to copy it.
8.
After the copy operation is complete, drag the drive icon to Trash.
9.
Disconnect the camera from the computer.
After confirming that the back lamp is not flashing red, disconnect the USB cable.
148
USB port
USB
USB cable
Using the Camera with a Computer