Table of Contents
Advertisement
IMPORTANT!
• Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or
turn off Eye-Fi card communication (page 158) when on an aircraft or in any other
location where use of wireless communication is limited or prohibited.
• Loading an Eye-Fi card will cause the Eye-Fi indicator
appear on the monitor screen. Its transparent or not transparent
appearance indicates the communication status as shown below.
Transparent
Not transparent
Flashing
• A communication icon
data transfer is in progress.
• The camera's Auto Power Off (page 161) function is disabled while image data
transfer is in progress.
• A confirmation message will appear on the monitor screen if you try to turn off the
camera while image data transfer is in progress. Follow the instructions in the
messages (page 189).
• Transfer of a large number of images can take some time to complete.
• Depending on the type of Eye-Fi card you are using and its settings, images on the
Eye-Fi card may be deleted following image data transfer.
• Breaks in the image and/or audio may occur when recording a movie to or playing
a movie from an Eye-Fi card.
• Proper Eye-Fi card data communication may not be possible due to camera
settings, battery level, or operating conditions.
Access point cannot be found or no
transferable image data exists.
Image transfer in progress
Searching for access points
will appear on the monitor screen while image
151
to
Using the Camera with a Computer
Advertisement
Table of Contents
