Using The Camera With A Macintosh; Connecting The Camera To Your Computer And Saving Files - Casio Exilim EX-ZR500 User Manual

Using the Camera with a Macintosh

When you want to
do this:
Save images to your
Macintosh and view
them there manually
Save images to your
Macintosh
automatically/
Manage images
Play movies

Connecting the Camera to Your Computer and Saving Files

Never use your computer to modify, delete, move, or rename any image files
that are in the camera's built-in memory or on its memory card.
Doing so can cause problems with the camera's image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
• The camera does not support operation with Mac OS X 10.0. Operation is
supported with Mac OS 10.1, 10.2, 10.3, 10.4, 10.5, 10.6, 10.7, and 10.8 (using the
OS standard USB driver) only.
NOTE
• You also can use your computer's card slot (if it has one) or a commercially
available card reader to access image files directly from the camera's memory
card. For details, see the user documentation that comes with your computer.
Operating
System Version
OS X
OS X
OS X
147
Required Software
Installation not required.
iPhoto, which comes bundled
with some Macintosh products.
With OS X 10.4.11 or higher,
QuickTime 7 or higher
Using the Camera with a Computer
See
page:
147
–
149