Table of Contents
Advertisement
Display Messages
ALERT
Battery is low.
Can not find the file.
Card ERROR
Check connections!
Connecting to the
network
File could not be
saved because
battery is low.
Folder cannot be
created.
LENS ERROR
LENS ERROR 2
Load paper!
The camera's protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
Battery power is low.
The image you specified with the slideshow "Images"
setting cannot be found. Change the "Images" setting (page
122) and try again.
There is something wrong with the memory card. Turn off
the camera, remove the memory card and then reload it
into the camera. If this message re-appears when you turn
the camera back on, format the memory card (page 167).
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a
computer or some other storage device.
You are attempting to connect the camera to a printer while
the camera's USB settings are not compatible with the USB
system of the printer (page 135).
Camera power was turned off while image data was being
copied to a computer or other device using a FlashAir card
or an Eye-Fi card (pages 150, 152).
Battery power is low, so an image file could not be saved.
You are trying to record a file while there are already 9999
files stored in the 999th folder. If you want to record more,
delete files you no longer need (page 32).
This message appears and the camera turns off whenever
the lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
The Anti Shake unit of the camera may be malfunctioning.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
The printer ran out of paper while printing.
189
Appendix
Advertisement
Table of Contents
