Table of Contents
Advertisement
Installation of the interface cable ferrite core
Clamp the small ferrite core onto the interface cable as shown in Fig. 3-2. Take
care to avoid damaging the interface cable when installing the ferrite core. The
ferrite core should be anchored firmly in place with the fastener that comes
with it, as shown in Fig.3-3 and 3-4.
Installation of the peripheral unit cable ferrite core
Clamp the large ferrite core onto the cable of the interface unit using the same
procedure as you do for the interface cable ferrite core. With the peripheral unit
cable ferrite core, however, you have to loop the cable as shown in Fig. 3-5.
5cm or less
One loop
Ground wire
Fig. 3-5
– 4 –
Large ferrite core
(28mm diameter)
Advertisement
Chapters
Table of Contents
