Safety Instructions - Furuno FS-1570 Installation Manual

SAFETY INSTRUCTIONS

DANGER
Do not touch cable from
the antenna coupler during
transmission.
Electrical shock, serious
injury or death can result if
the cables are touched during
transmission.
Do not touch this point.
Do not touch the whip
antenna or wire antenna.
Electrical shock, serious
injury or death can result if
the antenna is touched during
transmission.
WARNING
Do not work inside the
equipment unless totally
familiar with electrical
circuits.
Hazardous voltage which can
shock exists inside the equip-
ment.
Turn off the power at the
mains switchboard before
beginning the installation.
Post a sign near the switch
to indicate it should not be
turned on while the equip-
ment is being installed.
Fire, electrical shock or
serious injury can result if the
power is left on or is applied
while the equipment is being
installed.
Confirm that the power supply voltage
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply
can cause fire or equipment damage to the
equipment . The voltage rating appears on
the label at the rear of the display unit.
DANGER
Keep the following compass safe
distances.
Transceiver
Unit
FS-2570C
HS-2001
PP-510
IC-302/303
SEM-21Q
PR-850A
PR-300
IB-581
i
CAUTION
Ground the equipment.
Ungrounded equipment can
give off or receive electro-
magnetic interferenece or
cause electrical shock.
Use copper strap with careful.
An edge of it may harm your hand.
Standard Steering
compass compass
FS-1570T
1.20 m
2.20 m
FS-2570T
0.70 m
1.30 m
1.00 m
0.80 m
2.20 m
1.00 m
0.90 m
1.4 m
0.70 m
1.40 m
0.40 m
0.90 m
0.80 m
0.60 m
1.50 m
0.70 m
0.70 m
1.0 m