Distress Alert Unit Ic-302-Dsc/Incoming Indicator; External Loudspeaker - Furuno FS-1570 Installation Manual

1.6.4 Distress alert unit IC-302-DSC/Incoming indicator

IC-303-DSC
Select the mounting location where the button on the unit can be operated easily in an
emergency. See the back of the manual for mounting dimensions and recommended clearance
space. (Compass safe distance: Standard, 0.8 meters, Steering, 0.6 meters)
1. Unfasten four screws to remove the cover.
2. Fasten the unit with four tapping screws.
3. Pass the cable through appropriate entrance to connect to the terminal board. There are
two cable entrances, one at the bottom and one on the back. Select one.
4. Attach the cover with four screws.
5. Clamp the cable outside of the unit with cable clamp (local supply).

1.6.5 External loudspeaker

The external loudspeaker can be installed on a tabletop, the overhead or bulkhead. Fasten the
loudspeaker to the mounting location with tapping screws, or nuts, bolts and washers. For
mounting dimensions, see the outline drawing at the back of this manual.
Terminal
Board
Cable Entrances
IC-302-DSC/IC-303-DSC
1-13