Dual Zone System; Audio Control Features - Kenwood Z828MP Instruction Manual

General features

Dual Zone System

The following operation allows separate sound sources to
control the output of the front and rear speakers.
The Dual zone system can only be switched on when the
source is set to the TV(AUX) mode.
Dual Zone System On/Off:
Press the 2ZONE button for at least one second to switch the
Dual Zone System on and off.
"Zone 2 ON" is displayed when Dual Zone System is turned on.
NOTE
• You can select the speaker output, either front or rear, for the
AUX input and the unit's tuner or audio source.
For details refer to "Switching Dual Zone System Output" (page
42) for the menu settings.
• The Bass, Middle, Treble and Loudness adjustments do not
affect the TV(AUX) channel.
• When you set the Dual zone system to on whilst the non-fading
preout is switched on, the sound of the non-fading preout does
not be outputted.
• If the Attenuator function is turned on while the Dual Zone
System is enabled, the Attenuator is not applied to the TV(AUX)
source.
• The Dual Zone System function operates on the AUX source of
this unit only.

Audio control features

AUD
AUD
LOUD
DISP NAME.S
Selecting mode
— 18 —
¢
FM
2ZONE
DAB
PWR
OFF
NF
MENU
4
AM
Setting value