Middle Centre Frequency; Middle Level; Middle Quality Factor; Treble Centre Frequency - Kenwood Z828MP Instruction Manual

Audio control features

Middle Centre Frequency

Adjust the centre frequency of the middle.
Display and setting:
"MID FRQ" : 0.5 / 1.0 / 1.5 / 2.0 kHz.

Middle Level

Adjust the middle level.
Display and setting:
"MID" : - 8 – + 8

Middle Quality Factor

Adjust the middle quality factor.
Display and setting:
"Middle Q" : 1.0 / 2.0

Treble Centre Frequency

Adjust the centre frequency of the treble.
Display and setting:
"TRE FRQ" : 10.0 / 12.5 / 15.0 / 17.5 kHz

Treble Level

Adjust the treble level.
Display and setting:
"TRE" : - 8 – + 8

Balance Level

Adjust the balance level.
Display and setting:
"Balance" : Left 15 – Right 15

Fader Level

Adjust the fader level.
Display and setting:
"Fader" : Rear 15 – Front 15

Non-Fading Level

Adjust the Non-fading output level.
Display and setting:
"NF Level" : - 15 – + 15
NOTE
• This mode is available only when the non-fading output function
is set to on.
• Not available during the Dual zone system is on.
— 20 —