Table of Contents
Advertisement
Audio Adjustments
1
Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than "STANDBY".
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Preset position setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "Position"
"Preset Position".
4
Select the seat you want to compensate
Press the [4] or [¢] button.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Listening Position Fine Adjustments
Making fine adjustment of the value specified at
Preset position selection per speaker.
1
Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than "STANDBY".
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Manual position setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "Position"
"DTA".
4
Select the speaker you want to set
Turn the [VOL] knob and press it when the
desired item is displayed.
Item
Setting overview
"FRONT" / "L"
Front Left speaker
"FRONT" / "R"
Front Right speaker
"REAR" / "L"
Rear Left speaker
"REAR / "R"
Rear Right speaker
"SUBWOOFER" / "L"
Subwoofer Left
"SUBWOOFER" / "R"
Subwoofer Right
"INITIAL"
Initialize the setting values.
5
Set the value
Press the [4] or [¢] button.
36
|
KDC-X8016BT/ KDC-X8016BTL/ KDC-X7016/ KDC-X7016L
Adjust between 0 and 170 cm.
Press the [VOL] knob for at least 1 second if you
want to execute the "INITIAL".
6
Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Dual Zone System
The separate sources can be selected for Front
channel and Rear channel.
Display
Overview
"2Zone Rear Volume"*
1
Adjust the volume of Rear channel.
"0" — "35"
"Detailed Setup"
"2Zone"
Sets the Dual Zone System.
"OFF"/ "ON"
1
"2Zone Select"*
Specifies the destination of sub source sound
when the Dual Zone function is turned on.
"Rear"/ "Front"
1
*
The Dual Zone System is set to "ON".
1
Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than "STANDBY".
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Detailed Setup".
4
Select the item you want to set
Turn the [VOL] knob and press it when the
desired item is displayed.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• Select Main source by [SRC] button.
• Adjust the volume of Front channel by [VOL] knob.
• The Audio Control has no effect on sub source.
• There are following limitations when Dual Zone System
is enabled.
- There is no output from the subwoofer.
- "Fader", "Subwoofer Level" of <Audio Control> (page 34)
and DSP function are not available.
• The Bluetooth audio source can be set exclusively to the
front speaker. Set "2Zone Select" to "Rear".
(
: Factory setting)
Hide quick links:
Advertisement
Table of Contents
