Erasing A Track - Sony MZ-B3 Operating Instructions Manual

Erasing a track

Note that once a recording has been
erased, you cannot retrieve it. Check
the track number before erasing.
ERASE
p(stop)
((play)
1
Play the track you want to erase.
2
Press ERASE while playing the
track.
"Erase OK?" and "PushErase"
appear in the display alternately,
and the recorder plays the selected
track repeatedly.
To cancel erasing, press p.
3
Check the track number in the
display and press ERASE again.
The track is erased from the MD
and the remaining tracks are
renumbered. The recorder then
starts to play the succeeding track.
If you have erased the last track of
the MD, the recorder pauses at the
end of the preceding track.
To erase other tracks
Repeat steps 1 to 3.
To erase a part of a track
Add track marks at the beginning and
the end of the part you want to erase,
then erase the part.
Notes
When you press p after erasing a track,
"Toc Edit" flashes and the recorder starts
writing the new data to the MD. Do not
move or jog the recorder while "Toc
Edit" is flashing in the display.
You cannot erase a track on an MD that
is record-protected. Before erasing a
track, close the tab on the side of the
MD.
SONY MZ-B3 (E) 3-798-373-22(1)
25