Erasing A Track Mark - Sony MZ-N505 Operating Instructions Manual

T MARK
1
While playing or pausing an MD,
press T MARK on the recorder at the
point you want to mark.
"MK ON" appears in the display, and
a track mark is added. The track
number will increase by one.
To add track marks while
recording (except while
synchro-recording)
Press T MARK on the recorder at the
point you want to add a track mark.
You can use Auto Time Stamp to add
track marks automatically at speci-tied
intervals (except while digital recording)
(page 30).
Erasing a track mark
When you record with analog (line) input,
unnecessary track marks may be recorded
wh&-e recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark. The track
numbers will change as follows:
You cannot erase a track mark on a track
that has been checked-out from your
computer.
Track numbers decrease
II
T MARK
1
While playing the track with the track
mark you want to erase, press II to
pause.
2
Find the track mark by pressing I44
slightly.
For example, to erase the third track
mark, find the beginning of the third
track. "0O:OO" appears in the display.
"MK 003" appears in the display for
2 seconds.
3
Press T MARK to erase the mark.
"MK OFF" appears in the display.
The track mark is erased and the two
tracks are combined.
."'.
c
When you erase a track mark, name assigned to
the mark is also erased.
43-68