Tips On Recording; To Monitor The Sound Being Recorded; To Know The Recording Condition; To Protect A Recorded Md - Sony MZ-B3 Operating Instructions Manual

Tips on recording

To monitor the sound being
recorded
Connect headphones (not supplied) to
the 2 jack and adjust the volume by
turning VOL. Sound levels are copied
onto the MD automatically and
independently of the volume for
monitoring.
To know the recording
condition
The record indicator flashes according
to the recording condition.
Record indicator
Recording
condition
Flashes according
While recording
to the loudness of
the source (voice
mirror).
Flashes.
Recording
standby
Slowly flashes.
Recording with
less than 3
minutes'
recording time
available

To protect a recorded MD

To record-protect an MD, slide open
the tab at the side of the MD. In this
position, the MD cannot be recorded.
To record again, slide the tab back so
the tab is visible.
Rear of an MD
Record-protect
Continue to next page m
SONY MZ-B3 (E) 3-798-610-22(1)
Tab
15