Erasing A Track Mark - Sony MZ-B3 Operating Instructions Manual

Erasing a track mark

You can erase a track mark to combine
the tracks before and after the track
mark. You can erase regular track
marks and special track marks in the
same way.
The track numbers will change as
follows.
1 2 3
4
Erase a track mark
.
1 2
Track numbers decrease
TRACK MARK
=/+
1
While the recorder is playing an
MD, press P to pause.
2
Find the track mark you want to
erase by pressing = or +
slightly.
The track number and "MARK"
appear in the display.
For example, to erase the third
track mark, find the beginning of
the third track.
Appears for about 2 seconds
MONO
24
3
Press TRACK MARK on the
recorder to erase the mark.
The track mark is erased and the
two tracks are combined.
4
To erase other track marks
Repeat steps 2 and 3.
3
Notes
When you press p after erasing track
marks, "Toc Edit" flashes and the
recorder starts writing the new data to
the MD. Do not move or jog the
recorder while "Toc Edit" is flashing in
the display.
You cannot ease track marks on an MD
that is record-protected. Before erasing
track marks, close the tab on the side of
the MD.
P (pause)
SONY MZ-B3 (E) 3-798-610-22(1)
MONO
MONO