Step 8 – Viewing Images; Using Capture Without Sd Card - Cuddeback Capture Operating Instructions Manual

STEP 8 – Viewing images
There are various methods of viewing Capture images.
CuddeView Field Viewer: Cuddeback's CuddeView 4-in-1 viewer will allow
you to view images, copy the images to a CF card, erase the images from
the SD card, and then put the original SD card back into Capture. CuddeView
allows you to use one CF card to record images from multiple cameras.
See www.cuddeback.com for more information on CuddeView.
Personal Computer (PC or MAC): Replace the SD card with a fresh SD card
and take the original SD card with you to view on your PC or other device.
Digital Camera: You can view the images with an optional viewer or a point-
and-shoot camera that is able to read Capture images (NOTE: not all SD-based
cameras can view Capture images, please test any camera before purchasing).

Using Capture without SD card

When Capture is used without an SD card, images are stored in Capture's
internal image memory. Capture features an internal memory of about 30 MB.
This may allow storage of up to 100 images. Images can be transferred from
internal memory to an SD card.
If you use the Capture without an SD card, follow these steps to transfer the
images from the internal memory to an SD card.
1. Turn the Rotary Switch to OFF, and wait until the LCD goes blank.
2. Wait until the green LED turns off and then install an SD card.
3. Turn the Rotary Switch to any other setting, such as Set Time.
The green LED will turn on.
4. When the green LED turns off, (NOTE: You may need to wait up to 3 minutes)
the images have been copied from the internal memory to the SD card.
DO NOT REMOVE or INSTALL the SD CARD WHEN THE GREEN LED IS ON.