Storing Disk Cartridges - Texas Instruments DS10 Installation And Operation Manual

Cartridge disk system
Table of Contents

Advertisement

)1;, _ _ _ _ _ _ _
~
946261-9701
HANDLE
(A) 137245
COVER RELEASE
BUnON
Figure 2-18. Disk Cartridge
1.
Carry disk packs from place to place using the handle.
OISK CARTRIOGE
2.
Always reassemble the disk cartridge by setting the dust cover down on a solid surface,
then placing the cartridge into the dust cover.
3.
Never set the disk cartridge on any surface without the dust cover in place.
4.
Never stack disk cartridges or set anything on top of a disk cartridge.
2.3.5.3 Storing
Disk
Cartridges. The following precautions should be observed when storing disk
cartridges.
1.
Always store the disk cartridges in the operating environment listed in Table 2-2.
2.
Disk cartridges that have been stored in, or subjected to, environments outside the range
listed in Table 2-2 should be conditioned to the environment listed in Table 2-2 for at least
24 hours prior to use. During this period of conditioning, the cartridges should be re-
moved from their containers.
3.
For long term storage, store the disk cartridges in their original shipping containers no
more than eight
high.
The containers provide protection against dust and debris, large
environmental changes, contamination by chemicals, and physical damage.
2-23
Digital Systems Division

Advertisement

Table of Contents
loading

This manual is also suitable for:

990

Table of Contents