Powering On/Off The Projector; Powering On The Projector - Optoma DLP projector User Manual

Installation
 Turn on the
projector first and
then select the
signal sources.
4
English

Powering On/Off the Projector

Powering On the Projector

1. Remove the lens cap. 
2. Ensure that the power cord and signal cable are securely
connected.  The Power LED will be flash Green (1.0s on,
1.0s off).
3. Turn on the lamp by pressing " " button either on the top
of the projector or on the remote. The Power LED will flash
green (0.5s on, 0.5s off).
The startup screen will display in approximately 10 seconds.
The first time you use the projector, you can select your
preferred language from quick menu after the startup screen
display.
4. Turn on your source (computer, notebook, video player,
etc.). The projector will detect your source automatically.
If you connect multiple sources at the same time, press

the "Source" button on the remote control to switch
between inputs.
http://www.pureglare.com.au
Power LED
Power
2
Lens Cap
1