Servo Reversing - JR Racing XR3i Quick Start Setup

4680 JR XR3i manual 7/17/02
Servo Reversing (Function Mode)
The Servo Reversing feature of the XR3i is a very convenient
feature when setting up a new model. The purpose of the
servo reversing function is to change the direction of the
servo rotation in relation to the wheel/trigger movement. The
Servo Reversing function is available for the steering, throttle
and Auxiliary Channel 3 of the XR3i.
st
R E V • N O R M
12:14 PM Page 29
Current Channel
ST = Steering
TH = Throttle
AUX = Auxiliary
Channel 3
—
Current Servo
Direction
Accessing the Servo
Reversing Function
Press the Mode key
until "REV. NORM" ENTER
appears on the screen. SCROLL CHANNEL
CLEAR
INCREASE DECREASE
Press the Increase or Decrease keys to move
the cursor to the desired servo direction.
1. Turn the transmitter power switch on.
2. Press the Scroll key to access Function Mode.
3. Press the Scroll key until "REV.NORM" appears in small
letters to the right of the screen.
4. Press the Channel key to select the channel to be changed
(ST = Steering, TH = Throttle, AUX = Auxiliary Channel 3).
5. Press the Increase or Decrease keys to move the cursor to
the desired direction.
6. To exit the Function mode, either turn off the transmitter
power switch or press the Scroll and Channel keys at the
same time.
Press the Channel key
to select the desired
channel to be adjusted.
STS = Steering
THS = Throttle
AUX = Auxiliary
Channel 3
29