Exponential - JR Racing XR3i Quick Start Setup

4680 JR XR3i manual 7/17/02
Exponential (Function Mode)
The Exponential feature of the XR3i allows you to alter
the response rate of the steering or throttle control around
neutral without affecting the maximum amount of steering
or throttle available. The adjustment range is from -100% to
0% (Linear) to +100%. Exponential is factory set to linear for
both steering and throttle. Exponential is often used to settle
down a car that is twitchy around center without giving up
maximum steering response. The XR3i provides both posi-
tive (increase sensitivity at neutral) and negative (decrease
sensitivity at neutral) exponential values.
st
E X P
ln
thf
E X P
ln
thb
E X P
ln
12:14 PM Page 23
Accessing the Exponential function
Press the Scroll key
until "EXP" appears on
the screen.
Press the Increase and Decrease keys to select
Steering Exponential
the desired exponential value.
Adjustment
Values: -100% to Linear (LN) to +100%.
Current Value
1. Turn the transmitter power switch on.
2. Press the Scroll key to access the Function mode.
3. Press the Scroll key until "EXP" appears in small letters
Forward Throttle Exponential
Adjustment
4. Press the Increase or Decrease keys to select the desired
5. Press the Scroll key to access the travel End-Point
Current Value
6. To exit the Function mode, either turn off the transmitter
Braking Exponential
Adjustment
Current Value
ENTER
SCROLL CHANNEL
CLEAR
INCREASE DECREASE
on the left side of the screen.
exponential value.
Adjustment function
power switch or press the Scroll and Channel keys at the
same time.
23