Copy Model Data - JR Racing XR3i Quick Start Setup

4680 JR XR3i manual 7/17/02
Copy Model Data (System Mode)
The Copy Model Data function allows you to copy the
current model data into the model memory of the blinking
model selected. Before using the Copy Model Data function,
be sure you know what model number you want to copy the
data to as all data in this selected model will be lost. If the
current model being copied from uses the default name, the
model name from the model being copied to will be retained.
cpy
20
12:14 PM Page 20
2
Model being
copied to
Accessing the Copy Model
Data Function
Press and hold the
Scroll and Channel
keys at the same time ENTER
SCROLL CHANNEL
while turning the
transmitter power
switch on. Next,
press the Scroll key
CLEAR
until "CPY" appears.
INCREASE DECREASE
Press the Increase and Decrease keys at the
same time to copy model data from the current
model to the selected model.
1. Press the Scroll and Channel keys at the same time
and hold.
2. Turn on the transmitter power switch to enter the
System mode.
3. Press the Scroll key until "CPY" appears on the screen.
4. Press the Increase or Decrease key to select the desired
model number you want the current model data copied to.
This model number being select should be blinking.
5. Press the Increase and Decrease keys at the same time
to copy the current model data into the selected model
number. To confirm that the selected model has been
copied to, a beep will sound and the model number
selected (1, 2, 3 or 4) will stop flashing.
6. To exit the System mode, either turn the transmitter power
switch off or press the Scroll and Channel keys at the
same time.