Frame Rate Select - JR Racing XR3i Quick Start Setup

4680 JR XR3i manual 7/17/02
Frame Rate Select (System Mode)
The Frame Rate function allows you to select one of two
transmitter frame rates available: Normal "N" - the default or
Fast "F". The Normal Frame Rate should be selected if you
are using only non-digital servos. The Fast Frame Rate may
be selected if you are using at least one digital servo.
frm
F
Note: The Frame Rate function offers quicker
response times in the "F" or Fast mode. Some
types of non-JR servos are not compatible in the
"F" Fast mode and require the radio to be operated
in the "N" Normal mode.
12:14 PM Page 15
Accessing the Frame Rate Function
Press and hold the
Scroll and Channel
keys at the same time
while turning the
transmitter power
switch on. Next, press
the Scroll key until
"FRM" appears.
Current Press the Increase or Decrease key to select the
Frame Rate
desired frame rate.
1. Press the Scroll and Channel keys at the same time
2. Turn on the transmitter power switch to enter the System
3. Press the Scroll key until "FRM" appears on the screen.
4. Press the Increase or Decrease key to select the desired
5. Press the Scroll key to access the Auxiliary Channel 3
6. To exit the System mode, either turn the transmitter power
ENTER
SCROLL CHANNEL
CLEAR
INCREASE DECREASE
and hold.
mode.
frame rate (N or F).
function.
switch off or press the Scroll and Channel keys at the
same time.
15