Data Reset - JR Racing XR3i Quick Start Setup

4680 JR XR3i manual 7/17/02
Data Reset (System Mode)
The Data Reset function allows you to reset all the program-
ming in the selected model (1, 2, 3 or 4) to the factory default
settings. Before using the Data Reset function, it is important
to enter the Model Select function and check to make sure
the current model number indicated (1, 2, 3 or 4) is the
model to which you want to reset to the factory default
settings. The Model Select function is described on page 14.
clr
12:14 PM Page 19
Model to
be Reset
1
Accessing the Data Reset Function
Press and hold the Scroll
and Channel keys at the
ENTER
same time while turning
SCROLL CHANNEL
the transmitter power
switch on. Next, press
the Scroll key until
"CLR" appears.
CLEAR
INCREASE DECREASE
Press the Increase and Decrease keys at the
same time to reset (clear) all settings for the
selected model to the factory default settings
1. Press the Scroll and Channel keys at the same time
and hold.
2. Turn on the transmitter power switch to enter the
System mode.
3. Press the Scroll key until "CLR" appears on the screen.
4. Press the Increase and Decrease keys at the same time to
reset the data. To confirm that the selected model's
programming has been reset, a beep will sound and the
model number selected (1, 2, 3 or 4) will stop flashing.
5. Press the Scroll key to access the Copy Model
Data function.
6. To exit the System mode, either turn the transmitter power
switch off or press the Scroll and Channel keys at the
same time.
19