Table 67 Tools > Firewall > Firewall Setting - ZyXEL Communications MAX-206M2 User Manual

Chapter 15 The Firewall Screens
The following table describes the labels in this screen.
Table 67 TOOLS > Firewall > Firewall Setting
LABEL
Enable Firewall
Bypass Triangle
Route
Max NAT/Firewall
Session Per User
Packet Direction
Log
Apply
Reset
162
DESCRIPTION
Select this to activate the firewall. The WiMAX Modem controls access and
protects against Denial of Service (DoS) attacks when the firewall is activated.
Select this if you want to let some traffic from the WAN go directly to a computer in
the LAN without passing through the WiMAX Modem.
Select the maximum number of NAT rules and firewall rules the WiMAX Modem
enforces at one time. The WiMAX Modem automatically allocates memory for the
maximum number of rules, regardless of whether or not there is a rule to enforce.
This is the same number you enter in Network > NAT > General.
Select the situations in which you want to create log entries for firewall events.
No Log - do not create any log entries
Log Blocked - (LAN to WAN only) create log entries when packets are blocked
Log Forwarded - (WAN to LAN only) create log entries when packets are
forwarded
Log All - create log entries for every packet
Click to save your changes.
Click to restore your previously saved settings.
User's Guide