ZyXEL Communications MAX-206M2 User Manual page 135

Table 55 VOICE > Phone Book > Incoming Call Policy
LABEL
No Answer
Waiting Time
Advanced Setup
#
Activate
Incoming Call
Number
Forward to
Number
Condition
Apply
Reset
The WiMAX Modem checks the Advanced rules first before checking the
Forward to Number rules. All rules are checked in order from top to bottom.
User's Guide
DESCRIPTION
This field is used by the No Answer Forward to Number feature and No Answer
conditions below.
Enter the number of seconds the WiMAX Modem should wait for you to answer an
incoming call before it considers the call is unanswered.
The number of the item in this list.
Select this to enable this rule. Clear this to disable this rule.
Enter the phone number to which this rule applies.
Enter the phone number to which you want to forward incoming calls from the
Incoming Call Number. You may leave this field blank, depending on the
Condition.
Select the situations in which you want to forward incoming calls from the
Incoming Call Number, or select an alternative action.
• Unconditional - The WiMAX Modem immediately forwards any calls from the
Incoming Call Number to the Forward to Number.
• Busy - The WiMAX Modem forwards any calls from the Incoming Call
Number to the Forward to Number when your SIP account already has a call
connected.
• No Answer - The WiMAX Modem forwards any calls from the Incoming Call
Number to the Forward to Number when the call is unanswered. (See No
Answer Waiting Time.)
• Block - The WiMAX Modem rejects calls from the Incoming Call Number.
• Accept - The WiMAX Modem allows calls from the Incoming Call Number.
You might create a rule with this condition if you do not want incoming calls
from someone to be forwarded by rules in the Forward to Number section.
Click to save your changes.
Click to restore your previously saved settings.
Chapter 13 The Phone Book Screens
135