Wimax Modem Hardware; Leds; Figure 4 The Wimax Modem's Leds; Table 2 The Wimax Modem - ZyXEL Communications MAX-206M2 User Manual

1.2 WiMAX Modem Hardware

Follow the instructions in the Quick Start Guide to make hardware connections.

1.2.1 LEDs

The following figure shows the LEDs (lights) on the WiMAX Modem.

Figure 4 The WiMAX Modem's LEDs

WIMAX
LINK
The following table describes your WiMAX Modem's LEDs (from right to left).

Table 2 The WiMAX Modem

LED
Power
LAN
Voice
User's Guide
STRENGTH
INDICATOR
STATE DESCRIPTION
Off The WiMAX Modem is not receiving power.
Red The WiMAX Modem is receiving power but has been
unable to start up correctly or is not receiving enough
power. See the Troubleshooting section for more
information.
Green The WiMAX Modem is receiving power and functioning
correctly.
Off The LAN is not connected.
Green The WiMAX Modem has a successful Local Area Network
(Ethernet) connection and is active during modem activity.
Off No SIP account is registered, or the WiMAX Modem is not
receiving power.
Green A SIP account is registered.
Green (Blinking) A SIP account is registered, and the phone attached to the
LINE port is in use (off the hook).
Yellow A SIP account is registered and has a voice message on
the SIP server.
Yellow (Blinking) A SIP account is registered and has a voice message on
the SIP server, and the phone attached to the LINE port is
in use (off the hook).
Chapter 1 Getting Started
VOICE LAN POWER
LEDS LEDS
1 & 2 1 & 2
LED
33