Hercules Wireless G ADSL Modem Router User Manual page 57

Modem Router 802.11G-A-54
If you are configuring a PPPoA connection:
Once you have configured your connection, don't forget to click the Apply and Save button to save
your settings. Doing so will establish an Internet connection, which you can then test (please refer to
chapter 5.2.1. Testing your ADSL connection).
If you are configuring a DHCP connection:
Hercules Wireless G ADSL Modem Router
- Enter your Connection Username (Login) and
Connection password.
This information is found in the confirmation of
membership email or letter sent to you by your ISP,
and is already entered on your reminder sheet.
- Select the Encapsulation type: VC MUX or LLC
(information provided by your ISP).
- Enter the VPI (Virtual Path Identifier) and VCI
(Virtual Circuit Identifier).
The default values are 8 for the VPI and 35 for the
VCI.
- Verify that your modem router is properly
connected.
- Have a look at the information in the Download
speed (transfer speed of Internet data to your
computer) and Upload speed (transfer speed of
data on your computer to the Internet) sections.
This information is quoted in Kilobits per second. A
download speed of 1024Kbps is the equivalent of 1
Megabit per second.
- Finally, you will find your computer's
which you will need later on in WiFi Manager.
- The IP address, the subnet mask
gateway are displayed.
This information is automatically assigned by your
ISP's DHCP server.
- If you wish, click the Renew button to have the
DHCP server assign a new IP address; or
IP address,
and the default
User Manual – 57/80