Programme Information; Peak Load Cut-Out (Optional) - Miele PT 7251 Operating Instructions Manual

Programme information

Pressing the K "Information" button will call
up further information about the programme
e.g.:
2 Cottons dry
Start date and time: 10.7.2003
Start time: 9:47
Time after start: 0h 23 min
Time left: 0h 11min
Progr.-End: 10: 21 h
Area: 1 Drying
Block: 1 Pre-drying
Exhaust temperature Actual: 59 °C
Exhaust temperature Required: 74 °C
Air intake temperature: Actual: 125 °C
Air intake temperature: Required: 150 °C
Peak load: No
Anti-crease: 3 s./87s./60 min
Exhaust / Recirculation: Recirculation
2 Cottons dry
Block end signal Yes
^ Press the A "Back" button to return to the
programme sequence display.
M.-Nr. 06 533 441
e
m K f
e
e
e
e
-
A
Additional options

Peak load cut-out (optional)

If the peak-load cut out function is activated
the heating will switch itself off and any
programme running will be stopped. The
following message will appear in the display:
1 Cottons dry plus
Prog. stopped. Peak load cut-out.
Programme will continue.
ü
Once the peak load has finished, the
programme will continue automatically as
before.
If the door is opened during the peak load
cut-out the programme will have to be
started again.
f
19