Select A Programme - Miele PT 7251 Operating Instructions Manual

Select a programme

This machine is equipped with an electronic
sensor system that continually monitors the
moisture level of the laundry.
As soon as the required dryness is reached
the laundry is cooled down. At the end of
this cooling down phase the drying
programme is automatically finished.
Standard programmes:
– For drying cotton and
linen textiles
1 Cottons dry plus 0 %
2 Cottons dry 0 %
3 Cottons damp 20 %
4 Cottons damp 25%
5 Cottons damp 40 %
– For drying synthetic and mixed fibre
textiles
6 Minimum iron dry
7 Minimum iron damp 10 %
8 Minimum iron damp 20 %
9 Delicates 20 %
10 Woollens 5 min.
– For airing textiles
11 Timed drying cold
– For drying small loads of laundry or for
finishing drying individual items.
12 Timed drying warm
M.-Nr. 06 533 441
0 %
15 min.
20 min.
1 Cottons dry plus
2 Cottons dry
3 Cottons damp
^ Turn the rotary dial to select a programme
(e.g. Programme 2 Cottons).
Select the additional option [
"Blockplus" if required
(this is not available on standard
programmes)
^ Confirm the selection of the programme by
pressing the rotary selector.
The following (example) will appear in the
display:
22 Cottons dry
0 % Drying
Cooling down
[
^ If wished you can now select the Pre-
drying programme block, by pressing the
[ "Blockplus" function button.
When the [ "Blockplus" function button is
pressed, the following will appear in the
display:
2 2 Cottons dry
24 % Pre-drying
0 % Drying
[
The [ field is highlighted.
Press the function button again to deselect
the function.
If you do not wish to make any further
alterations to the programme:
^ Press the h "Start" button.
The programme will start.
Drying
0%
0%
20%
FC A
10.0 / 10.0 kg
70°C
e
m A
10.0 / 10.0 kg
e
m A
13