Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Miele PT 7251
Summary of Contents for Miele PT 7251
-
Page 1: Operating Instructions
Operating instructions Dryers PT 7251 PT 7331 PT 7401 PT 7501 PT 7801 To avoid the risk of accidents or damage to the machine it is essential to read these instructions before installing, commissioning and using it for the first time. - Page 2 M.-Nr. 06 533 441...
-
Page 3: Table Of Contents
Explanation of symbols on the data plate ........31 Abbreviated operating instructions PT 7251/7331/7401/7501/7801 ....33 This machine must only be installed and commissioned by a Miele authorised technician. -
Page 4: Warning And Safety Instructions
– items with padding which has been Faulty components must only be damaged, e.g. pillows and jackets. replaced by genuine Miele original spare parts. Only when these parts are fitted can – items soiled with grease or oil which have the safety standards of the machine be not been properly cleaned beforehand. - Page 5 Warning and Safety instructions This machine must not be operated in Any removable outer panels must be the same room as dry cleaning back in place, and all moving or machines which use solvents containing electrical parts shielded before the machine chlorofluorocarbons (CFCs).
- Page 6 The gas mains connection and the gas Accessory parts may only be fitted when connection to the machine should be expressly approved by Miele. If other switched off for all cleaning and parts are used, guarantee, performance and maintenance work and in the event of a fault.
-
Page 7: Caring For The Environment
Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Packaging e.g. cling film, polystyrene and plastic wrappings must be kept out of the reach of babies and young children. -
Page 8: Description Of The Machine
Description of the machine a Emergency stop switch f Electrical connection Press the red button to switch the machine off. g Air intake b Control panel h Exhaust connection c Drum door Pull the door handle to open the drum door. d Access to fluff / lint filter e 4 adjustable screw feet M.-Nr. -
Page 9: Control Elements
Description of the machine d PC / Optical interface Control elements This interface is used for transferring data to a Display the control unit from a PC and vice versa. Cottons dry plus e Rotary selector Cottons dry Turning the selector brings up options and Cottons damp menus in the display. - Page 10 Description of the machine Function buttons Chip card operation f Stop/End The chip card is supplied without any The function button on the right-hand side is programmes. used to stop a programme after it has See the programming instruction booklet for started.
-
Page 11: Drying
Drying Sort the laundry Important: Textiles with large metal accessories such as Not all textiles are suitable for machine buckles, hooks and zip tags should be drying. Please read the instructions given placed in a laundry bag or a pillow case on the garment care label. -
Page 12: Before Using For The First Time
Drying ^ Open the drum door. The machine must be commissioned by a ^ Load the drum. Miele service technician or a dealer The pre-sorted laundry should be loaded authorised by the manufacturer before it is loosely in the drum. -
Page 13: Select A Programme
Drying Select a programme Cottons dry plus This machine is equipped with an electronic Cottons dry sensor system that continually monitors the Cottons damp moisture level of the laundry. As soon as the required dryness is reached the laundry is cooled down. At the end of ^ Turn the rotary dial to select a programme this cooling down phase the drying (e.g. - Page 14 Drying If you wish to make alterations before the Cottons dry 10.0 kg start of the programme, e.g. to the load size, temperature or residual moisture: Drying 70°C Cooling down ^ Confirm the selection of the programme by pressing the rotary selector. ^ Turn the rotary dial to alter the residual The following (example) will appear in the display:...
- Page 15 Drying At the end of a programme If no more laundry is to be processed: ^ Close the drum door Cottons dry Programme finished ^ Press the 0 "Off" button to switch the Anti-crease Ready at 12:35 machine off. ^ Switch off the on-site mains switch. The programme end time is displayed, ^ Close all stopcocks for gas and steam as the buzzer sounds and the anti-crease...
-
Page 16: Card Operation
Card operation Cards on which a programme has been If the card is inserted the wrong way round saved can only be used on the machine the following message will appear in the type for which they have been written. display: Unwritten cards can be used universally. -
Page 17: Additional Options
Additional options Start date and time Language selection If you want a programme to start at a later The language shown in the display can be time use the m button for "Start date and changed briefly before starting a time". -
Page 18: Programme Stop
Additional options Changing the programme order After setting the required start date and time: ^ Press the Start button h and the The order of the programme in progress can be changed or programme blocks can be programme selected will commence at the repeated. -
Page 19: Programme Information
Additional options Programme information Peak load cut-out (optional) Pressing the K "Information" button will call If the peak-load cut out function is activated up further information about the programme the heating will switch itself off and any e.g.: programme running will be stopped. The following message will appear in the display: Cottons dry Cottons dry plus... -
Page 20: Standard Programme Overview
Multi-layered cotton and 1 Cottons dry plus 0 % linen textiles which do not get dry in the Cottons dry programme. (Normal+) PT 7251 10 kg 2 Cottons dry 0 % Single and multi-layered cotton and linen textiles. PT 7331 13 kg... -
Page 21: Optional Modules
Optional modules Operating data If there is no more memory available in the operating data module a message will By pressing the \ "Operating data" button, appear after pressing the h "Start" button to the module can be used to read or delete say that the operating data will be operating data either before the start of a overwritten. - Page 22 Optional modules Programme data Programme fault: None (only the last 3 faults are Operating data module saved.) Programme data Area 1: Drying Delete data Block1: Pre-drying Process type: Residual moisture Value: 15 % Actual residual moisture: 15 % After selecting Programme data the Duration: 6 min following (example) will appear in the Max.
- Page 23 Optional modules Delete data Operating data module Programme data Delete data After selecting Delete data the following message will appear in the display: Operating data module~ Delete data Module: 21.02.2004 Total data: 12.07.2004 The module menu option can be used to delete the total data and programme data from the operating data memory.
-
Page 24: Problem Solving Guide
Problem solving guide Error messages A message will flash in the display if there is a problem either before starting a Repairs to electrical, gas or steam programme or once it has started: operated machines may only be carried If any of the following messages still appear out by a suitably qualified person in after five re-starts of the machine the accordance with national and local safety... - Page 25 Problem solving guide Drive motor fault Gas system fault § Motor overheating. Call the Service Department if restart does not work. Press the start button to continue. If this message appears after a programme ^ Allow the motor to cool down. has been started: ^ Open the gas tap and then press the "h Start"...
-
Page 26: After Sales Service
Should you require spare parts ensure that you only use original Miele Spare Parts (and remember to let the Spare Parts Department know the model number, serial number and material number of your machine). -
Page 27: Cleaning And Care
Cleaning and care Fluff /lint filter Dryer A lint filter collects any fluff and lint from the Before cleaning the dryer switch off at the laundry. on-site mains switch. With gas heated dryers the gas connection It should be cleaned at least once a day and must also be switched off, both at the mains whenever a reminder to clean it appears in and at the machine. - Page 28 Cleaning and care The following should be checked and cleaned once a year by a Miele service technician: – The burners and burner compartment on gas heated dryers, the heaters and heater shaft on electric heated dryers. – the entire interior of the dryer –...
-
Page 29: Notes For The Installer
The machine must not be transported All parts marked * are available from your without its transport pallet in position. Miele Dealer or the Miele Spare Parts Department. Do not install the machine in a room where there is a risk of frost occurring. - Page 30 In the event of a Air inlet and exhaust connection fault please contact the Miele Service Department. This machine must only be used when it is connected to a suitable ducting system.
-
Page 31: Explanation Of Symbols On The Data Plate
10 Drum volume/Laundry dry weight 11 Kinetic energy * Noise emission 12 Run-up time * 13 Braking time * Registered on the A scale 14 Heating PT 7251 68 dB 15 Electric heating PT 7331 67 dB 16 Fuse rating (on-site) PT 7401... - Page 32 M.-Nr. 06 533 441...
-
Page 33: Abbreviated Operating Instructions Pt 7251/7331/7401/7501/7801
Abbreviated operating instructions PT 7251/7331/7401/7501/7801 1. Sort the laundry Not all textiles are suitable for machine drying. Please read the instructions given on the garment care label. q = Dry at normal temperature r = Dry at low temperature s = Do not tumble dry ^ Sort the laundry according to fibre type and weave 2. - Page 34 M.-Nr. 06 533 441...
- Page 35 M.-Nr. 06 533 441...
- Page 36 Alteration rights reserved 48.05 M.-Nr. 06 533 441 /02...