Programme Stop; Programme Cancellation; Changing The Programme Order; Programme Information - Miele PT 8807 Operating Instructions Manual

Programme stop

To halt the programme press the f button.
The programme remains stationary.
2 Cottons dry
Programme stop
ü
To continue the programme press the "Start" button.

Programme cancellation

To cancel a programme press the f "Stop/End"
button twice in succession.

Changing the programme order

The order of the programme in progress can be
changed or programme blocks can be repeated.
^ Press the f button and the programme will stop.
2 Cottons dry
Programme stop
ü
^ After pressing the ü button the current area or
block will appear in the display.
See also "Programme structure" in the Progamming
Manual.
Reorganise -> 2 Cottons dry
Programme stop
Area 1: Drying
Area 1: Drying
Block 1: Pre-drying
^ Turn the rotary dial to select the area, and then
press it to confirm your selection.
Select Area: 1 Drying, or 2 Cooling down and
confirm your selection.
^ Turn the rotary dial to select the block and then
press it to confirm your selection.
Select Block: Drying 1-10, or Cooling down 1-10
and confirm your selection.
^ Press the S "Save" button and then press "Start" to
reorganise the programme order or press the A
"Back" button to go back to programme stop and
not change the programme order.

Programme information

Pressing the K "Information" button will call up further
f
information about the programme e.g.:
2
Start date and time: 10.7.2009
Start time: 9:47
Time after start: 0h 23 min
Time left: 0h 11min
Progr.-End: 10: 21 h
Area: 1 Drying
Block: 1 Pre-drying
Exhaust temperature Actual: 59 °C
Exhaust temperature Required: 74 °C
Air intake temperature: Actual: 125 °C
Air intake temperature: Required: 150 °C
f
Peak load: No
Anti-crease: 3 s./87s./60 min
Exhaust / Recirculation: Recirculation
2
Block end signal Yes
e
A
S
^ Press the A "Back" button to return to the
programme sequence display.
-
A
S
Additional options
Cottons dry
m
Cottons dry
e
f
K
e
e
e
e
-
A
17