American Dynamics Illustra Flex Series Quick Start Manual page 13


(Optional) 4S Electrical junction box
1. Secure the mounting kit (optional) to 4S Electrical box using 2 appropriate screws.
2. Secure the unit case to mounting kit using 2 appropriate screws.
3. Tuck the cables in the 4S Electrical box.
4. Adjust the view angles (zoom, focus, and horizontal rotation).
5. Attach the unit housing.
6. Turn the power on after installed the unit.
Note Keeping tilt angel over 25 degrees is recommended when IR-LED light is used. If tilt angel is
below 25 degrees from the horizontal, the image would be flashed by the reflection of IR-LED
light.
F 2-6: M
IGURE OUNTING THE
13
Illustra Flex 1MP & 3MP Outdoor Dome
The mounting kit is
not supplied
C
AMERA