W
C
IRELESS
ONFIGURATION
B
S
ASIC
ETTINGS
Figure 63: Network Settings
IP A
S
DDRESS
ETTINGS
Obtain an IP address automatically—Check this radio button
■
here to set the SMCWTVA100 to use DHCP to automatically receive
its network IP settings from the LAN you connect it to.
Use the following address:—Check this radio button to configure
■
the SMCWTVA100 IP settings manually:
IP Address—Enter the IPv4 address that the SMCWVTA100 is
●
assigned for the local LAN.
Subnet Mask—Enter the 32 bit subnet mask that the local LAN
●
requires.
Gateway Address—If you need to route IP packets outside the
●
local LAN, enter the IPv4 address of the designated gateway
router.
DNS Address—If you need to use a specific Domain Name Server,
■
enter its IPv4 address here.
If necessary you can modify the SMCWTVA100's Wi-Fi SSID name, wireless
band and security settings to match your requirements.
Within this menu, you can change the name of the 802.11 wireless SSID
that is broadcast by the SMCWTVA100.
– 72 –
| Web Configuration
C
6
HAPTER
Wireless Configuration