W
IRELESS
C
S
ONNECTION
ETUP
H
R
ARDWARE
ESET TO
F
D
ACTORY
EFAULT
S
ETTINGS
Figure 10: "Wired" Connection Setup
In this mode, as shown in
to a local WLAN using its Wi-Fi interface. All devices (except those using
Miracast) can connect to the SMCWTVA100 over the local W/LAN in order
to screencast. Use the "Bridge over Wireless" mode in the Quick Connect
setup to use this mode.
Figure 11: Wireless Connection Setup
To reset all configuration to the factory default press the Mode and Power
On/Off button (see
"Key Hardware Features" on page
for five (5) seconds.
The SMCWTVA100 will reboot and initialize with its original factory default
configuration.
– 27 –
C
HAPTER
Non-Bridged Connection Setups
Figure
11, your SMCWTVA100 connects directly
| Installation Guide
3
16) simultaneously